Can's Springs

For Large Cans Spring
(Trapezoid type spring)

4 Section Worm Spring (for 24")

3 Section Worm Spring (for 28"- 40")

 

COMPUTERIZED SPRING MACHINES

Equippedwith CNC Automatic Spring Machine and Heat Treatment Furnance, we make first calss quality Cans Spring. Cans Spring is indespensabie for spinning high quality yarns. It reduces tension in sliver during feeding and uniformes sliver density. It also can increase can capacity for sliver 15-20 0/0 at the same time. Please refer to table when ordering, specify maximum load as well as diameter even pitch of each coil and height in which spring will be used.

 

SPRINGS STANDARD SPECIFICATIONS

Sizes
#9
#12
#14
#16
#20
#24
#36
#40
Card
Drawing
High Speed Drawing
Spring Load
3
5.5
6.5
8
14~16
17~20
17~23
20
40
50
Free Height
-
36"~42"
-
-
-
42"~52"
-
-
Coil (Single or Double)
S
S
S
S
S
S
S
S
W
W
Plate Dia
213
230
340
390
490
490
490
585
890
980
Plate Skirt
12
14
14
18
26
26
26
26
26
26

The load (or pressure) being applied on the spring varies depending upon the material and fiber count to be spun
As a general rule, the load of spring is determined to be:
1) 15 to 20% lower than the full-cans for Regular type
2) 10 to 15% lower than the full-cans for High-speed type
Our High-Speed Spring has an exceptional effect to prevent the synthetic sliver being clogged at the tube. This advantage gains the good reputation of the users.
Please refer standard load table when you deside the Spring load.
Please also note that regular type has spiral spring only but high speed type are with 3 tension wires.